Frequently Asked Questions

Hydromx “Ready” is a new product offering where Hydromx is provided with the energy-saving nanoparticles not yet mixed into the solution. Hydromx “Ready” is a traditional inhibited ethylene or propylene glycol that is formulated to accept installation in the field of the energy-saving nanoparticles in the future.

This helps building owners manage critical budgets and timing to get the best system performance. The cost for Hydromx “Ready” is around 1.2 to 1.5 times greater than traditional glycol but is formulated to be “ready” to change into the Hydromx energy-saving nanofluid in the future.

Simply stated, Hydromx outperforms water. The industry is used to glycols needing a “derate” as they do not perform as well as water. Nanofluids are changing this perspective as they are glycols that outperform water.

Hydromx believes a new term for “uprate™” needs to be created to better explain its performance over water. When much of the US was subjected to a polar vortex in February 2020, many facilities that used water for heat transfer froze their HVAC components. Replacing the water with Hydromx would be a simple solution to offer freeze protection while increasing efficiency.

Hydromx has been thoroughly reviewed by an independent panel with NSF sponsorship to generate both a Life Cycle Analysis Report and an Environmental Product Declaration Report.

These reports state “…when compared to inhibited water, the net benefits of Hydromx are greater than 26% for any impact category, while benefits approach 36% compared to a propylene glycol-based HTF.” These reports also document the resulting carbon emissions reduction to satisfy many government codes and mandates.

Hydromx comes with a 20-year limited warranty. In addition, Hydromx carries a $10 million liability policy per project and the policy has never received a claim.

Over 15 years. After three years of development, Hydromx was first installed in 2008 at a NATO airbase in the mountains of Turkey to enhance the performance of a hangar heating system. The 2500-gallon installation was completed in one day and resulted in 35% energy savings with a less than two-year ROI.

India was one of the first big markets for Hydromx. Over 100 installations of Hydromx have produced between 20-35% energy savings in cooling, heating, and process applications.

The first installation in the United States was in 2015 in the server rooms of the HBO broadcast center in Hauppauge, New York. The building experienced 27% energy savings and 90% more free-cooling hours. The 65,000 kWh annual savings resulted in a one-year ROI.

Among its numerous case studies, Hydromx is the only approved heat transfer fluid in the Empire State Building in Manhattan. It is currently running in multiple loops throughout the building and is under consideration to be installed in all Empire State Buildings loops by 2024.

Hydromx is certified nontoxic by FDA regulations. Both Hydromx’s ethylene and propylene versions carry the highest available safety rating from NSF for toxicity. Hydromx-EG (ethylene) carries an NSF HT-2 rating. Hydromx-PG (propylene) has an NSF HT-1 rating. Documentation of these ratings can be found at nsf.com (search for “Hydromx.”)

Hydromx is available in two glycol formulations: ethylene (Hydromx “Red”) and propylene (Hydromx “Blue.”). Hydromx also includes the energy-saving, non-abrasive, non-toxic, nanomaterial along with corrosion and biological inhibitors

The existing heat transfer fluid in a closed-loop system is drained and replaced with Hydromx. One pipefitter can complete installation in usually one to two days.

Hydromx will arrive on-site in concentrate to be mixed with tap water per Hydromx’s installation instructions.  Hydromx challenges the industry to identify another energy-saving product that is as fast and easy to install with similar energy-saving benefits.

Reports from Argonne National Labs in 1997 describe early nanofluid research as a perceived increase in the surface area of the heat transfer fluid. Hydromx operates in a similar fashion as its Nano-Thermo® technology delivers a perceived increase of the surface area of a fluid beyond the surface area of the fluid in contact with the heat exchanger.

Hydromx improves the heat transfer of the entire fluid to the heat exchanger wall. The fluid in the center of the pipe improves its thermal conduction to the heat exchanger wall.

As a result, HVAC systems that operate with Hydromx require less energy consumption to achieve the same performance when compared to the same system running on water or a water/glycol blend. By improving the system efficiency, Hydromx reduces power consumption, saves money, and reduces carbon emissions into the atmosphere.

A nanofluid is a fluid containing stably suspended nanoparticles with dimensions smaller than 100 nanometers (one billionth of a meter). The term “nanofluid” was first used by Choi (1995) to describe this new class of nanotechnology-based heat transfer fluids with enhanced thermal properties. In the past 10 years, the US Government has co-authored patents on two different nanofluids.

Hydromx is an energy-saving nanofluid. Hydromx uses Nano-Thermo® technology to evenly suspend nanoparticulate in a glycol-based solution. As a result, Hydromx significantly improves the heat transfer of closed-loop hydronic heating and cooling equipment. Hydromx has been verified by utilities and third parties to reduce power consumption by 20-35%.